Aviation Theory

Crosswind Component: Three Methods, One Answer

ATPL Questions ATPL Instructor · 16 Nov 2026 · 6 min read
Crosswind Component: Three Methods, One Answer

A crosswind component question looks simple: a runway, a wind, and a number to find. Yet it appears again and again in 032 Performance and 033 Flight Planning, and it is a favourite in PPL and CPL theory too. The good news is that there is only one answer, and three reliable ways to reach it. If you know all three, you can pick the fastest one for the question in front of you and use another to check your work.

Why One Wind Figure Isn't Enough

The wind reported by ATC or in a METAR is a single direction and speed, but the aeroplane does not feel it as one thing. The part of the wind blowing along the runway affects your take-off and landing distances; the part blowing across the runway affects control, drift and your ability to keep the aircraft straight. That is why every wind is split into a headwind or tailwind component and a crosswind component.

Each aircraft has a maximum demonstrated crosswind published in its flight manual, the strongest crosswind the manufacturer showed during certification. Operators often set their own, lower limits on top of that. In the exam, the crosswind component is usually the gateway to a second question: is the runway usable, which runway is better, or what headwind should go into the performance chart? Get the component wrong and everything that follows is wrong too.

Method 1: Trigonometry — The Exact Answer

The wind vector can be resolved into two perpendicular parts using the angle between the wind direction and the runway heading:

  • Crosswind = wind speed × sin(angle)
  • Headwind = wind speed × cos(angle)

Worked example: you are landing on runway 27 and the tower gives the wind as 300°/20 kt. The angle between the wind and the runway is 300 − 270 = 30°.

  • Crosswind = 20 × sin 30° = 20 × 0.5 = 10 kt
  • Headwind = 20 × cos 30° = 20 × 0.87 ≈ 17 kt

This is the exact method and the one to use whenever the answer options are close together. The only thing you need is a few sine values in your head: sin 30° = 0.50, sin 45° = 0.71, sin 60° = 0.87, sin 90° = 1. Cosine is simply the sine of the complementary angle, so cos 30° = sin 60° = 0.87.

Method 2: The Clock-Face Rule — The Mental Shortcut

Picture the angle between wind and runway as minutes on a clock face. The fraction of the hour tells you the fraction of the wind that becomes crosswind:

  • 15° off → quarter past → about ¼ of the wind speed
  • 30° off → half past → about ½
  • 45° off → quarter to → about ¾
  • 60° or more off → treat it as the full wind speed

For our example, 30° off with 20 kt gives half of 20, which is 10 kt. Same answer, no calculator. The rule is deliberately conservative: at 45° the true factor is 0.71, so ¾ slightly overestimates the crosswind, and at 60° you call it full when it is really 0.87. That is fine in the cockpit, where erring on the side of caution is a virtue. In the exam it can be a problem when the answer choices are only a few knots apart, so use the clock face to get a quick estimate and to sanity-check an option, not as your final word on a tight question.

Method 3: The Flight Computer or Wind Component Chart

The third method is the graphical one. On a mechanical flight computer such as the CRP-5, you set the wind direction under the index, mark the wind speed down from the centre, then rotate the runway heading to the index. The pencil mark now sits a certain distance left or right of the centre line, which is the crosswind, and a certain distance above or below the centre, which is the headwind or tailwind. Read both off the grid.

The printed wind component chart found in performance manuals and in exam appendices does the same job: find the radial line for the angle between wind and runway, follow it out to the arc for the wind speed, then read down for crosswind and across for headwind. Both tools give an answer close to the trigonometric one, limited only by how carefully you plot. The chart matters because performance questions often expect you to use it, and because it handles angles beyond 90°, where the headwind quietly turns into a tailwind, without any extra thinking.

One Wind, Three Methods, One Answer

Runway 27, wind 300°/20 kt:

  1. Trigonometry: crosswind 20 × sin 30° = 10 kt; headwind 20 × cos 30° ≈ 17 kt.
  2. Clock face: 30° is half past, so crosswind ≈ ½ × 20 = 10 kt; the headwind is clearly most of the 20 kt.
  3. Flight computer or chart: plotting 30° off and 20 kt gives a mark roughly 10 units across and about 17 units up the grid.

Three routes, one result. Small differences of a knot or two between the shortcut and the exact figure are normal and tell you which method to trust when the options are close: the maths. If your three answers disagree by a lot, you have probably mis-read the angle, and that is worth catching before you commit.

Exam Traps That Cost Easy Marks

  • Magnetic versus true. Runway numbers are magnetic. Wind from ATC and ATIS is given in degrees magnetic; wind in a METAR or TAF is given in degrees true. If the question quotes a METAR wind and a significant variation, convert before you take the angle. Examiners love this one.
  • Angles over 90°. If the wind is more than 90° from the runway heading, the along-runway component is a tailwind. Use the angle from the reciprocal heading, or just note that cos of an angle beyond 90° is negative. A 15 kt tailwind limit is a common second step in these questions.
  • Gusts. When the wind is reported as, say, 300°/20 gusting 30 kt, read the question stem carefully. If it asks for the limiting or worst case, the gust value is usually the one you are expected to resolve. Do not assume; the stem will tell you.
  • "Maximum demonstrated" wording. This is not a legal limit by itself, but if the question gives it, it is the number your answer is being compared against. Watch for distractors that compare the full wind speed, not the component, with the limit.
  • Typical distractors. The wrong options are rarely random. One is usually the headwind instead of the crosswind, one is the full wind speed, and one uses the angle from the wrong runway end. Knowing this pattern lets you eliminate quickly.

Practise Until It's Automatic

Speed on these questions comes from repetition, not from re-reading the theory. In the ATPL Questions question bank you can work through crosswind and wind component questions from 032 and 033, read the explanation under each one, and see what other students have added in the comments, including which questions carry the seen in the real exam marking. Save the ones you got wrong or hesitated on into a test, group them in a folder for performance and planning calculations, and run through them again a few days before the exam. By then you should be able to glance at a runway and a wind, pick a method and have the component before you reach the answer options.

Ready to practice this topic? Study with 20,000+ real exam questions, explanations and AI insights.
Share: